FWD Front Wheel Drive Bearing Removal Adapter Puller Pulley Kit 23pcs Tool

Description

Description：
Operation:
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
FEATURES：
ALL-IN-ONE KIT, everything you need for a fast & effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle
EFFECTIVE & EFFICIENT KIT, designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service work
UNIVERSAL COMPATIBILITY, designed for front wheel drive cars and small trucks; comes with a premium well-organized ABS box for easy storage and transport
STURDY & ANTI-RUST, constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
WARRANTY, backed by 2-year limited warranty from the manufacturer, free return or exchange if the item is defective. All ORION MOTOR TECH® automotive tool kits are heavy duty, professional grade, so it’s easy to stand behind everything we sell. WARNING AVOID using an impact wrench; improper usage may cause DAMAGE to NUT or BOLT
SPECIFICATIONS
Adapter Drift sizes Approx.:
50mm, 55mm, 60mm, 64mm,67mm, 70mm, 72mm, 74mm, 75mm, 78mm, 82mm, 84mm, 88mm.
Receiver Sleeves sizes Approx.:
102mm, 91mm, 86.3mm, 76mm. Drive Shaft : 32mm and 38mm
Application:
fits front wheel drive cars and small trucks
Material:
carbon steel for tools, ABS plastic for case
Dimensions:
17.7 x 12.2 x 4.1 in.
Item Weight:
24 lb.